-- File Name : 8636Q160.BSD -- Created by : Altera Corporation -- Documentation : FLEX 8000 Family Datasheet -- AN39 - JTAG Boundary Testing in FLEX 8000 Devices -- Other important information is included in the -- readme.txt file included with the BSDL files. -- BSDL revision : 1.0 -- BSDL status : Preliminary -- Date created : 04/01/95 -- Device : EPF8636A -- Package : 160-pin Plastic-Quad Flat-Pack (PQFP) -- -- -- IMPORTANT NOTICE -- -- Altera and EPF8636A are trademarks of Altera Corporation. -- Altera products, marketed under trademarks are protected -- under numerous US and foreign patents and pending -- applications, maskwork rights, and copyrights. Altera -- warrants performance of its semiconductor products to -- current specifications in accordance with Altera's standard -- warranty, but reserves the right to make changes to any -- products and services at any time without notice. Altera -- assumes no responsibility or liability arising out of the -- application or use of any information, product, or service -- described herein except as expressly agreed to in writing -- by Altera Corporation. Altera customers are advised to -- obtain the latest version of device specifications before -- relying on any published information and before placing -- orders for products or services. -- -- Special Usage Notes -- for -- CONF_DONE, nSTATUS, and DCLK pins -- -- The functionality of these pins depends on whether JTAG -- testing is performed prior to device configuration or after -- the Device has been configured. When he device is configured -- CONF_DONE, nSTATUS, and nCONFIG pins will be high. -- -- CONF_DONE and nSTATUS: -- ---------------------- -- Before Configuration, these pins are outputs and will remain -- at logic level low. These must be declared as Linkage pins and -- the Boundary-Scan (BS) cells associated with them must be decalred as -- internals. -- After Configurations, these pins are inputs and must be pulled high -- at all times with an external pull up resistor. This is reflected -- by declaring them as inputs and declaring the BS cells associated -- with them as input cells. -- The BSDL file is written with nSTATUS and CONF_DONE pins as linkage -- If you wish to use JTAG in user mode and you would like to use these -- pins as inputs you must change their decleration from linkage to in -- and edit to internal cell to an input. -- -- DCLK: -- ----- -- Before configuartions, this pin is an input. -- After configuration, the user can select to make this pin as an -- output by selecting a special option in the software. If this -- option is selected then this pin must be declared as linkage and -- the BS cell associated with it becomes an internal cell. If on -- the other hand, the user did not select this option, this will be -- an input and the BSDL file should reflect that. -- This BSDL file is written with DCLK as an input. If you would like -- to use JTAG in user mode and DCLK is an slected to be an output, you -- must change the pin declaration from in to linkage and change the -- cell from input to internal. -- -- For further information on how to change the BSDL file contact the -- applications Hot Line at (800) 800-EPLD. -- -- -- entity epf8636aqc160 is generic (PHYSICAL_PIN_MAP : string := "PQFP160"); port ( IOE :inout bit_vector(1 to 110); nSP :in bit; MSEL0 :in bit; MSEL1 :in bit; nCONFIG :in bit; nSTATUS :linkage bit; CONF_DONE :linkage bit; DCLK :in bit; TCK :in bit; TDI :in bit; TDO :out bit; TMS :in bit; nTRST :in bit; DIN :in bit_vector(1 to 4); VCC :linkage bit_vector(1 to 15); GND :linkage bit_vector(1 to 15); NC :linkage bit_vector(1 to 4) use STD_1149_1_1990.all; -- Get standard attributes and definitions attribute PIN_MAP of epf8636aqc160 : entity is PHYSICAL_PIN_MAP; constant PGA192: PIN_MAP_STRING := "IOE: (56, 58, 61, 62, 63, 64, 65, 66, 67, 68, 69, 71, 72, 73, 74, 76,"& "77, 78, 79, 88, 89, 90, 91, 92, 93, 94, 98, 99, 100,"& "101, 102, 103, 104, 105, 108, 109, 110, 111, 112, 113, 114,"& "115, 122, 123, 124, 125, 127, 128, 129, 130,"& "132, 133, 134, 135, 136, 137, 138, 139, 141, 142, 143, 144,"& "145, 146, 147, 148, 150, 151, 152, 153, 155, 156, 157, 158,"& "159, 7, 8, 9, 10, 11, 12, 1, 14, 17, 18, 19, 20, 21, 22,"& "23, 24, 27, 28, 29, 30, 31, 32, 33, 34, 42, 43, 44, 46,"& "47, 48, 49, 50, 52, 53, 54),& "nSP:1, "& "MSEL0:3,"& "MSEL1:38,"& "nSTATUS:83,"& "nCONFIG:81,"& "DCLK:120,"& "CONF_DONE:118, "& "TCK:57,"& "TDI:55,"& "TDO:95,"& "TMS:59,"& "nTRST:40," & "DIN:(87, 116, 6, 35)," & "VCC:(4, 5, 26, 85, 106, 25, 41, 60, 70, 80, 107, 121, 140, 149, 160),"& "GND:(15, 16, 36, 37, 45, 51, 75, 84, 86, 96, 97, 117, 126, 131, 154)"& "NC: (2, 39, 82, 119)"; attribute TAP_SCAN_IN of TDI : signal is true; attribute TAP_SCAN_MODE of TMS : signal is true; attribute TAP_SCAN_OUT of TDO : signal is true; attribute TAP_SCAN_RESET of nTRST : signal is true; attribute TAP_SCAN_CLOCK of TCK : signal is (10.00e6, BOTH); attribute INSTRUCTION_LENGTH of epf8636aqc160 : entity is 3; attribute INSTRUCTION_OPCODE of epf8636aqc160 : entity is "EXTEST (000), " & "BYPASS (111), " & "SAMPLE (101) "; attribute INSTRUCTION_CAPTURE of epf8636aqc160 : entity is "101"; attribute BOUNDARY_CELLS of epf8636aqc160 :entity is "BC_1,BC_4"; attribute BOUNDARY_LENGTH of epf8636aqc160 :entity is 417; attribute BOUNDARY_REGISTER of epf8636aqc160 :entity is "0 (BC_1, IOE(1), input, X ), " & -- scan 1 "1 (BC_1, *, control, X ), " & "2 (BC_1, IOE(1), output3, X , 1, 1, Z), " & "3 (BC_1, IOE(2), input, X ), " & -- scan 2 "4 (BC_1, *, control, X ), " & "5 (BC_1, IOE(2), output3, X , 4, 1, Z), " & "6 (BC_1, *, internal, X ), " & -- scan 3 (Un-bonded pad, ignore data) "7 (BC_1, *, internal, X ), " & "8 (BC_1, *, internal, X ), " & "9 (BC_1, IOE(3), input, X ), " & -- scan 4 "10 (BC_1, *, control, X ), " & "11 (BC_1, IOE(3), output3, X , 10, 1, Z), " & "12 (BC_1, *, internal, X ), " &-- scan 5 (Double-bonded pad, ignore data) "13 (BC_1, *, internal, X ), " & "14 (BC_1, *, internal, X ), " & "15 (BC_1, IOE(4), input, X ), " & -- scan 6 "16 (BC_1, *, control, X ), " & "17 (BC_1, IOE(4), output3, X , 16, 1, Z), " & "18 (BC_1, IOE(5), input, X ), " & -- scan 7 "19 (BC_1, *, control, X ), " & "20 (BC_1, IOE(5), output3, X , 19, 1, Z), " & "21 (BC_1, IOE(6), input, X ), " & -- scan 8 "22 (BC_1, *, control, X ), " & "23 (BC_1, IOE(6), output3, X , 22, 1, Z), " & "24 (BC_1, IOE(7), input, X ), " & -- scan 9 "25 (BC_1, *, control, X ), " & "26 (BC_1, IOE(7), output3, X , 25, 1, Z), " & "27 (BC_1, IOE(8), input, X ), " & -- scan 10 "28 (BC_1, *, control, X ), " & "29 (BC_1, IOE(8), output3, X , 28, 1, Z), " & "30 (BC_1, *, internal, X ), " & -- scan 11 (Double-bonded pad, ignore data) "31 (BC_1, *, internal, X ), " & "32 (BC_1, *, internal, X ), " & "33 (BC_1, IOE(9), input, X ), " & -- scan 12 "34 (BC_1, *, control, X ), " & "35 (BC_1, IOE(9), output3, X , 34, 1, Z), " & "36 (BC_1, *, internal, X ), " & -- scan 13 (Double-bonded pad, ignore data) "37 (BC_1, *, internal, X ), " & "38 (BC_1, *, internal, X ), " & "39 (BC_1, IOE(10), input, X ), " & -- scan 14 "40 (BC_1, *, control, X ), " & "41 (BC_1, IOE(10), output3, X , 40, 1, Z), " & "42 (BC_1, IOE(11), input, X ), " & -- scan 15 "43 (BC_1, *, control, X ), " & "44 (BC_1, IOE(11), output3, X , 43, 1, Z), " & "45 (BC_1, IOE(12), input, X ), " & -- scan 16 "46 (BC_1, *, control, X ), " & "47 (BC_1, IOE(12), output3, X , 46, 1, Z), " & "48 (BC_1, IOE(13), input, X ), " & -- scan 17 "49 (BC_1, *, control, X ), " & "50 (BC_1, IOE(13), output3, X , 49, 1, Z), " & "51 (BC_1, IOE(14), input, X ), " & -- scan 18 "52 (BC_1, *, control, X ), " & "53 (BC_1, IOE(14), output3, X , 52, 1, Z), " & "54 (BC_1, IOE(15), input, X ), " & -- scan 19 "55 (BC_1, *, control, X ), " & "56 (BC_1, IOE(15), output3, X , 55, 1, Z), " & "57 (BC_1, IOE(16), input, X ), " & -- scan 20 "58 (BC_1, *, control, X ), " & "59 (BC_1, IOE(16), output3, X , 58, 1, Z), " & "60 (BC_1, *, internal, X ), " & -- scan 21 (Double-bonded pad, ignore data) "61 (BC_1, *, internal, X ), " & "62 (BC_1, *, internal, X ), " & "63 (BC_1, IOE(17), input, X ), " & -- scan 22 "64 (BC_1, *, control, X ), " & "65 (BC_1, IOE(17), output3, X , 64, 1, Z), " & "66 (BC_1, IOE(18), input, X ), " & -- scan 23 "67 (BC_1, *, control, X ), " & "68 (BC_1, IOE(18), output3, X , 67, 1, Z), " & "69 (BC_1, IOE(19), input, X ), " & -- scan 24 "70 (BC_1, *, control, X ), " & "71 (BC_1, IOE(19), output3, X , 70, 1, Z), " & "72 (BC_4, nCONFIG, input, X ), " & -- scan 25 nCONFIG "73 (BC_4, *, internal, X ), " & "74 (BC_4, *, internal, X ), " & "75 (BC_4, *, internal, X ), " & -- scan 26 nSTATUS "76 (BC_4, *, internal, X ), " & "77 (BC_4, *, internal, X ), " & "78 (BC_1, DIN(1), input, X ), " & -- scan 27 "79 (BC_4, *, internal, X ), " & "80 (BC_4, *, internal, X ), " & "81 (BC_1, IOE(20), input, X ), " & -- scan 28 "82 (BC_1, *, control, X ), " & "83 (BC_1, IOE(20), output3, X , 82, 1, Z), " & "84 (BC_1, IOE(21), input, X ), " & -- scan 29 "85 (BC_1, *, control, X ), " & "86 (BC_1, IOE(21), output3, X , 85, 1, Z), " & "87 (BC_1, IOE(22), input, X ), " & -- scan 30 "88 (BC_1, *, control, X ), " & "89 (BC_1, IOE(22), output3, X , 88, 1, Z), " & "90 (BC_1, IOE(23), input, X ), " & -- scan 31 "91 (BC_1, *, control, X ), " & "92 (BC_1, IOE(23), output3, X , 91, 1, Z), " & "93 (BC_1, IOE(24), input, X ), " & -- scan 32 "94 (BC_1, *, control, X ), " & "95 (BC_1, IOE(24), output3, X , 94, 1, Z), " & "96 (BC_1, IOE(25), input, X ), " & -- scan 33 "97 (BC_1, *, control, X ), " & "98 (BC_1, IOE(25), output3, X , 97, 1, Z), " & "99 (BC_1, IOE(26), input, X ), " & -- scan 34 "100 (BC_1, *, control, X ), " & "101 (BC_1, IOE(26), output3, X , 100, 1, Z), " & "102 (BC_1, IOE(27), input, X ), " & -- scan 35 "103 (BC_1, *, control, X ), " & "104 (BC_1, IOE(27), output3, X , 103, 1, Z), " & "105 (BC_1, IOE(28), input, X ), " & -- scan 36 "106 (BC_1, *, control, X ), " & "107 (BC_1, IOE(28), output3, X , 106, 1, Z), " & "108 (BC_1, IOE(29), input, X ), " & -- scan 37 "109 (BC_1, *, control, X ), " & "110 (BC_1, IOE(29), output3, X , 109, 1, Z), " & "111 (BC_1, IOE(30), input, X ), " & -- scan 38 "112 (BC_1, *, control, X ), " & "113 (BC_1, IOE(30), output3, X , 112, 1, Z), " & "114 (BC_1, IOE(31), input, X ), " & -- scan 39 "115 (BC_1, *, control, X ), " & "116 (BC_1, IOE(31), output3, X , 115, 1, Z), " & "117 (BC_1, IOE(32), input, X ), " & -- scan 40 "118 (BC_1, *, control, X ), " & "119 (BC_1, IOE(32), output3, X , 118, 1, Z), " & "120 (BC_1, IOE(33), input, X ), " & -- scan 41 "121 (BC_1, *, control, X ), " & "122 (BC_1, IOE(33), output3, X , 121, 1, Z), " & "123 (BC_1, IOE(34), input, X ), " & -- scan 42 "124 (BC_1, *, control, X ), " & "125 (BC_1, IOE(34), output3, X , 124, 1, Z), " & "126 (BC_1, IOE(35), input, X ), " & -- scan 43 "127 (BC_1, *, control, X ), " & "128 (BC_1, IOE(35), output3, X , 127, 1, Z), " & "129 (BC_1, IOE(36), input, X ), " & -- scan 44 "130 (BC_1, *, control, X ), " & "131 (BC_1, IOE(36), output3, X , 130, 1, Z), " & "132 (BC_1, IOE(37), input, X ), " & -- scan 45 "133 (BC_1, *, control, X ), " & "134 (BC_1, IOE(37), output3, X , 133, 1, Z), " & "135 (BC_1, IOE(38), input, X ), " & -- scan 46 "136 (BC_1, *, control, X ), " & "137 (BC_1, IOE(38), output3, X , 136, 1, Z), " & "138 (BC_1, IOE(39), input, X ), " & -- scan 47 "139 (BC_1, *, control, X ), " & "140 (BC_1, IOE(39), output3, X , 139, 1, Z), " & "141 (BC_1, IOE(40), input, X ), " & -- scan 48 "142 (BC_1, *, control, X ), " & "143 (BC_1, IOE(40), output3, X , 142, 1, Z), " & "144 (BC_1, IOE(41), input, X ), " & -- scan 49 "145 (BC_1, *, control, X ), " & "146 (BC_1, IOE(41), output3, X , 145, 1, Z), " & "147 (BC_1, IOE(42), input, X ), " & -- scan 50 "148 (BC_1, *, control, X ), " & "149 (BC_1, IOE(42), output3, X , 148, 1, Z), " & "150 (BC_1, DIN(2), input, X ), " & -- scan 51 "151 (BC_4, *, internal, X ), " & "152 (BC_4, *, internal, X ), " & "153 (BC_1, *, internal, X ), " & -- scan 52 (Double-bonded pad, ignore data) "154 (BC_1, *, internal, X ), " & "155 (BC_1, *, internal, X ), " & "156 (BC_4, *, internal, X ), " & -- scan 53 CONF_DONE "157 (BC_4, *, internal, X ), " & "158 (BC_4, *, internal, X ), " & "159 (BC_4, DCLK, input, X ), " & -- scan 54 "160 (BC_4, *, internal, X ), " & "161 (BC_4, *, internal, X ), " & "162 (BC_1, IOE(43), input, X ), " & -- scan 55 "163 (BC_1, *, control, X ), " & "164 (BC_1, IOE(43), output3, X , 163, 1, Z), " & "165 (BC_1, IOE(44), input, X ), " & -- scan 56 "166 (BC_1, *, control, X ), " & "167 (BC_1, IOE(44), output3, X , 166, 1, Z), " & "168 (BC_1, IOE(45), input, X ), " & -- scan 57 "169 (BC_1, *, control, X ), " & "170 (BC_1, IOE(45), output3, X , 169, 1, Z), " & "171 (BC_1, IOE(46), input, X ), " & -- scan 58 "172 (BC_1, *, control, X ), " & "173 (BC_1, IOE(46), output3, X , 172, 1, Z), " & "174 (BC_1, *, internal, X ), " & -- scan 59 (Double-bonded pad, ignore data) "175 (BC_1, *, internal, X ), " & "176 (BC_1, *, internal, X ), " & "177 (BC_1, IOE(47), input, X ), " & -- scan 60 "178 (BC_1, *, control, X ), " & "179 (BC_1, IOE(47), output3, X , 178, 1, Z), " & "180 (BC_1, *, internal, X ), " & -- scan 61 (Double-bonded pad, ignore data) "181 (BC_1, *, internal, X ), " & "182 (BC_1, *, internal, X ), " & "183 (BC_1, IOE(48), input, X ), " & -- scan 62 "184 (BC_1, *, control, X ), " & "185 (BC_1, IOE(48), output3, X , 184, 1, Z), " & "186 (BC_1, IOE(49), input, X ), " & -- scan 63 "187 (BC_1, *, control, X ), " & "188 (BC_1, IOE(49), output3, X , 187, 1, Z), " & "189 (BC_1, IOE(50), input, X ), " & -- scan 64 "190 (BC_1, *, control, X ), " & "191 (BC_1, IOE(50), output3, X , 190, 1, Z), " & "192 (BC_1, IOE(51), input, X ), " & -- scan 65 "193 (BC_1, *, control, X ), " & "194 (BC_1, IOE(51), output3, X , 193, 1, Z), " & "195 (BC_1, IOE(52), input, X ), " & -- scan 66 "196 (BC_1, *, control, X ), " & "197 (BC_1, IOE(52), output3, X , 196, 1, Z), " & "198 (BC_1, IOE(53), input, X ), " & -- scan 67 "199 (BC_1, *, control, X ), " & "200 (BC_1, IOE(53), output3, X , 199, 1, Z), " & "201 (BC_1, IOE(54), input, X ), " & -- scan 68 "202 (BC_1, *, control, X ), " & "203 (BC_1, IOE(54), output3, X , 202, 1, Z), " & "204 (BC_1, *, internal, X ), " & -- scan 69 (Double-bonded pad, ignore data) "205 (BC_1, *, internal, X ), " & "206 (BC_1, *, internal, X ), " & "207 (BC_1, IOE(55), input, X ), " & -- scan 70 "208 (BC_1, *, control, X ), " & "209 (BC_1, IOE(55), output3, X , 208, 1, Z), " & "210 (BC_1, *, internal, X ), " & -- scan 71 (Double-bonded pad, ignore data) "211 (BC_1, *, internal, X ), " & "212 (BC_1, *, internal, X ), " & "213 (BC_1, IOE(56), input, X ), " & -- scan 72 "214 (BC_1, *, control, X ), " & "215 (BC_1, IOE(56), output3, X , 214, 1, Z), " & "216 (BC_1, IOE(57), input, X ), " & -- scan 73 "217 (BC_1, *, control, X ), " & "218 (BC_1, IOE(57), output3, X , 217, 1, Z), " & "219 (BC_1, IOE(58), input, X ), " & -- scan 74 "220 (BC_1, *, control, X ), " & "221 (BC_1, IOE(58), output3, X , 220, 1, Z), " & "222 (BC_1, IOE(59), input, X ), " & -- scan 75 "223 (BC_1, *, control, X ), " & "224 (BC_1, IOE(59), output3, X , 223, 1, Z), " & "225 (BC_1, IOE(60), input, X ), " & -- scan 76 "226 (BC_1, *, control, X ), " & "227 (BC_1, IOE(60), output3, X , 226, 1, Z), " & "228 (BC_1, *, internal, X ), " & -- scan 77 (Double-bonded pad, ignore data) "229 (BC_1, *, internal, X ), " & "230 (BC_1, *, internal, X ), " & "231 (BC_1, IOE(61), input, X ), " & -- scan 78 "232 (BC_1, *, control, X ), " & "233 (BC_1, IOE(61), output3, X , 232, 1, Z), " & "234 (BC_1, *, internal, X ), " & -- scan 79 (Double-bonded pad, ignore data) "235 (BC_1, *, internal, X ), " & "236 (BC_1, *, internal, X ), " & "237 (BC_1, IOE(62), input, X ), " & -- scan 80 "238 (BC_1, *, control, X ), " & "239 (BC_1, IOE(62), output3, X , 238, 1, Z), " & "240 (BC_1, IOE(63), input, X ), " & -- scan 81 "241 (BC_1, *, control, X ), " & "242 (BC_1, IOE(63), output3, X , 242, 1, Z), " & "243 (BC_1, IOE(64), input, X ), " & -- scan 82 "244 (BC_1, *, control, X ), " & "245 (BC_1, IOE(64), output3, X , 244, 1, Z), " & "246 (BC_1, IOE(65), input, X ), " & -- scan 83 "247 (BC_1, *, control, X ), " & "248 (BC_1, IOE(65), output3, X , 247, 1, Z), " & "249 (BC_1, IOE(66), input, X ), " & -- scan 84 "250 (BC_1, *, control, X ), " & "251 (BC_1, IOE(66), output3, X , 250, 1, Z), " & "252 (BC_1, *, internal, X ), " & -- scan 85 (Double-bonded pad, ignore data) "253 (BC_1, *, internal, X ), " & "254 (BC_1, *, internal, X ), " & "255 (BC_1, IOE(67), input, X ), " & -- scan 86 "256 (BC_1, *, control, X ), " & "257 (BC_1, IOE(67), output3, X , 256, 1, Z), " & "258 (BC_1, *, internal, X ), " & -- scan 87 (Double-bonded pad, ignore data) "259 (BC_1, *, internal, X ), " & "260 (BC_1, *, internal, X ), " & "261 (BC_1, IOE(68), input, X ), " & -- scan 88 "262 (BC_1, *, control, X ), " & "263 (BC_1, IOE(68), output3, X , 262, 1, Z), " & "264 (BC_1, IOE(69), input, X ), " & -- scan 89 "265 (BC_1, *, control, X ), " & "266 (BC_1, IOE(69), output3, X , 265, 1, Z), " & "267 (BC_1, IOE(70), input, X ), " & -- scan 90 "268 (BC_1, *, control, X ), " & "269 (BC_1, IOE(70), output3, X , 268, 1, Z), " & "270 (BC_1, IOE(71), input, X ), " & -- scan 91 "271 (BC_1, *, control, X ), " & "272 (BC_1, IOE(71), output3, X , 271, 1, Z), " & "273 (BC_1, IOE(72), input, X ), " & -- scan 92 "274 (BC_1, *, control, X ), " & "275 (BC_1, IOE(72), output3, X , 274, 1, Z), " & "276 (BC_1, IOE(73), input, X ), " & -- scan 93 "277 (BC_1, *, control, X ), " & "278 (BC_1, IOE(73), output3, X , 277, 1, Z), " & "279 (BC_1, IOE(74), input, X ), " & -- scan 94 "280 (BC_1, *, control, X ), " & "281 (BC_1, IOE(74), output3, X , 280, 1, Z), " & "282 (BC_1, IOE(75) input, X ), " & -- scan 95 "283 (BC_1, *, control, X ), " & "284 (BC_1, IOE(75), output3, X , 283, 1, Z), " & "285 (BC_4, nSP, input, X ), " & -- scan 96 "286 (BC_4, *, internal, X ), " & "287 (BC_4, *, internal, X ), " & "288 (BC_4, MSEL0, input, X ), " & -- scan 97 "289 (BC_4, *, internal, X ), " & "290 (BC_4, *, internal, X ), " & "291 (BC_1, DIN(3), input, X ), " & -- scan 98 "292 (BC_4, *, internal, X ), " & "293 (BC_4, *, internal, X ), " & "294 (BC_1, IOE(76), input, X ), " & -- scan 99 "295 (BC_1, *, control, X ), " & "296 (BC_1, IOE(76), output3, X , 295, 1, Z), " & "297 (BC_1, IOE(77), input, X ), " & -- scan 100 "298 (BC_1, *, control, X ), " & "299 (BC_1, IOE(77), output3, X , 298, 1, Z), " & "300 (BC_1, IOE(78), input, X ), " & -- scan 101 "301 (BC_1, *, control, X ), " & "302 (BC_1, IOE(78), output3, X , 301, 1, Z), " & "303 (BC_1, IOE(79), input, X ), " & -- scan 102 "304 (BC_1, *, control, X ), " & "305 (BC_1, IOE(79), output3, X , 304, 1, Z), " & "306 (BC_1, IOE(80), input, X ), " & -- scan 103 "307 (BC_1, *, control, X ), " & "308 (BC_1, IOE(80), output3, X , 307, 1, Z), " & "309 (BC_1, IOE(81), input, X ), " & -- scan 104 "310 (BC_1, *, control, X ), " & "311 (BC_1, IOE(81), output3, X , 310, 1, Z), " & "312 (BC_1, IOE(82), input, X ), " & -- scan 105 "313 (BC_1, *, control, X ), " & "314 (BC_1, IOE(82), output3, X , 313, 1, Z), " & "315 (BC_1, IOE(83), input, X ), " & -- scan 106 "316 (BC_1, *, control, X ), " & "317 (BC_1, IOE(83), output3, X , 316, 1, Z), " & "318 (BC_1, IOE(84), input, X ), " & -- scan 107 "319 (BC_1, *, control, X ), " & "320 (BC_1, IOE(84), output3, X , 319, 1, Z), " & "321 (BC_1, IOE(85), input, X ), " & -- scan 108 "322 (BC_1, *, control, X ), " & "323 (BC_1, IOE(85), output3, X , 322, 1, Z), " & "324 (BC_1, IOE(86), input, X ), " & -- scan 109 "325 (BC_1, *, control, X ), " & "326 (BC_1, IOE(86), output3, X , 325, 1, Z), " & "327 (BC_1, IOE(87), input, X ), " & -- scan 110 "328 (BC_1, *, control, X ), " & "329 (BC_1, IOE(87), output3, X , 328, 1, Z), " & "330 (BC_1, IOE(88), input, X ), " & -- scan 111 "331 (BC_1, *, control, X ), " & "332 (BC_1, IOE(88), output3, X , 331, 1, Z), " & "333 (BC_1, IOE(89), input, X ), " & -- scan 112 "334 (BC_1, *, control, X ), " & "335 (BC_1, IOE(89), output3, X , 334, 1, Z), " & "336 (BC_1, IOE(90), input, X ), " & -- scan 113 "337 (BC_1, *, control, X ), " & "338 (BC_1, IOE(90), output3, X , 337, 1, Z), " & "339 (BC_1, IOE(91), input, X ), " & -- scan 114 "340 (BC_1, *, control, X ), " & "341 (BC_1, IOE(91), output3, X , 340, 1, Z), " & "342 (BC_1, IOE(92), input, X ), " & -- scan 115 "343 (BC_1, *, control, X ), " & "344 (BC_1, IOE(92), output3, X , 343, 1, Z), " & "345 (BC_1, IOE(93), input, X ), " & -- scan 116 "346 (BC_1, *, control, X ), " & "347 (BC_1, IOE(93), output3, X , 346, 1, Z), " & "348 (BC_1, IOE(94), input, X ), " & -- scan 117 "349 (BC_1, *, control, X ), " & "350 (BC_1, IOE(94), output3, X , 349, 1, Z), " & "351 (BC_1, IOE(95), input, X ), " & -- scan 118 "352 (BC_1, *, control, X ), " & "353 (BC_1, IOE(95), output3, X , 352, 1, Z), " & "354 (BC_1, IOE(96), input, X ), " & -- scan 119 "355 (BC_1, *, control, X ), " & "356 (BC_1, IOE(96), output3, X , 355, 1, Z), " & "357 (BC_1, IOE(97), input, X ), " & -- scan 120 "358 (BC_1, *, control, X ), " & "359 (BC_1, IOE(97), output3, X , 358, 1, Z), " & "360 (BC_1, IOE(98), input, X ), " & -- scan 121 "361 (BC_1, *, control, X ), " & "362 (BC_1, IOE(98), output3, X , 361, 1, Z), " & "363 (BC_1, IOE(99), input, X ), " & -- scan 122 "364 (BC_1, *, control, X ), " & "365 (BC_1, IOE(99), output3, X , 364, 1, Z), " & "366 (BC_1, DIN(4), input, X ), " & -- scan 123 "367 (BC_4, *, internal, X ), " & "368 (BC_4, *, internal, X ), " & "369 (BC_1, *, internal, X ), " & -- scan 124 (Un-bonded pad, ignore data) "370 (BC_1, *, internal, X ), " & "371 (BC_1, *, internal, X ), " & "372 (BC_4, MSEL1, input, X ), " & -- scan 125 "373 (BC_4, *, internal, X ), " & "374 (BC_4, *, internal, X ), " & "375 (BC_1, IOE(100), input, X ), " & -- scan 126 "376 (BC_1, *, control, X ), " & "377 (BC_1, IOE(100), output3, X , 376, 1, Z), " & "378 (BC_1, IOE(101), input, X ), " & -- scan 127 "379 (BC_1, *, control, X ), " & "380 (BC_1, IOE(101), output3, X , 379, 1, Z), " & "381 (BC_1, IOE(102), input, X ), " & -- scan 128 "382 (BC_1, *, control, X ), " & "383 (BC_1, IOE(102), output3, X , 382, 1, Z), " & "384 (BC_1, *, internal, X ), " & -- scan 129 (Double-bonded pad, ignore data) "385 (BC_1, *, internal, X ), " & "386 (BC_1, *, internal, X ), " & "387 (BC_1, IOE(103), input, X ), " & -- scan 130 "388 (BC_1, *, control, X ), " & "389 (BC_1, IOE(103), output3, X , 388, 1, Z), " & "390 (BC_1, *, internal, X ), " & -- scan 131 (Double-bonded pad, ignore data) "391 (BC_1, *, internal, X ), " & "392 (BC_1, *, internal, X ), " & "393 (BC_1, IOE(104), input, X ), " & -- scan 132 "394 (BC_1, *, control, X ), " & "395 (BC_1, IOE(104), output3, X , 394, 1, Z), " & "396 (BC_1, IOE(105), input, X ), " & -- scan 133 "397 (BC_1, *, control, X ), " & "398 (BC_1, IOE(105), output3, X , 397, 1, Z), " & "399 (BC_1, IOE(106), input, X ), " & -- scan 134 "400 (BC_1, *, control, X ), " & "401 (BC_1, IOE(106), output3, X , 400, 1, Z), " & "402 (BC_1, IOE(107), input, X ), " & -- scan 135 "403 (BC_1, *, control, X ), " & "404 (BC_1, IOE(107), output3, X , 403, 1, Z), " & "405 (BC_1, IOE(108), input, X ), " & -- scan 136 "406 (BC_1, *, control, X ), " & "407 (BC_1, IOE(108), output3, X , 406, 1, Z), " & "408 (BC_1, *, internal, X ), " & -- scan 137 (Double-bonded pad, ignore data) "409 (BC_1, *, internal, X ), " & "410 (BC_1, *, internal, X ), " & "411 (BC_1, IOE(109), input, X ), " & -- scan 138 "412 (BC_1, *, control, X ), " & "413 (BC_1, IOE(109), output3, X , 412, 1, Z), " & "414 (BC_1, IOE(110), input, X ), " & -- scan 139 "415 (BC_1, *, control, X ), " & "416 (BC_1, IOE(110), output3, X , 415, 1, Z), " & end epf8636aqc160 ;